Fastening Technology 40 mm and 50 mm Series
More with less - Multifunctional Fastening Technology
The Fastening Technology for the 40 mm and 50 mm series extrusions can be used for the entire Robotunits Modular Automation System.
Details
Features
Downloads
Inquiries
CAD data
Corner Bracket 40/50 GUS 4501
- 90° connector and strengthening element for 40 mm and 50 mm series extrusions
- 40/40 mm, 50/50 mm and 40/50 mm series combinations
- Connections to non-Robotunits extrusions and surfaces
Fixing Bracket 35x25 GUS 4651
- 90° connector and strengthening element
- Connection to non-Robotunits surfaces
- Attaching of table tops
Corner Bracket 100 GUS 1001
- 90° connector and strengthening element
- Centering tabs on both sides
- Can also be used longitudinally with 40 mm series extrusions
Corner Bracket 100, one side centered GUS 1101
- 90° connector and strengthening element
- Centering tabs on one side
- Connection to non–Robotunits surfaces
Drop-in Nut TIN 45_
- Used for 40 mm and 50 mm series extrusion
- Self-centering
- Slip protection (leaf springs)
- Anti-twist safeguard
Inserter TIN 9990
- Assembly tool for inserting Drop-in nuts into T-slot
T-Nut TIN 60_
- For 40 mm series and 50 mm series
- Self-centering
T-Nut Bar TIN_000
- Used for specific application with 40 mm and 50 mm series extrusions
- Material: untreated steel
- Stock length: 1000 or 3030 mm
T-Nut Iin-Line Fastener TIN 0171
- Used for end-to-end connections of 40 mm and 50 mm series extrusions
- Material: galvanized steel
Miter Fastener TIN 4545
- Fasteners for extrusions with miter cuts
- Material: galvanized steel
Special Fastener TIN_000
- For mounting parts onto Robotunits extrusions where no holes are to be seen from the outside of the assembly
- Material: galvanized steel, NBR
- In contrast with all other Robotunits fasteners, this fastener requires drilling
Facts
- Play-free, accurate and centrally aligned connections
- No drilling or milling necessary
- Equal strength on both sides of the connection
Benefits
- 100 % repeatability
- Quick and easy installation
- Strength comparable to a welded connection
One slot size fits all
- 13 profile shapes in 40 mm and 50 mm extrusion sizes simplify the application
- large, uniform 14 mm wide and 14mm deep T-slot
- same T-slot dimensions for all extrusions in the Modular Automation System
- Post insertion of heavy duty Drop-in Nuts up to M8 possible
Maximum stability
- worldwide unique play-free, accurate and centrally aligned connections
- single fastener provides up to 4 tons of tensile strength
- tubular honeycomb structure for outstanding torsion and load resistance
- maximum stability for all your applications
One fastener, double value
- two-sided fastener provides equal strength on both sides of the connection
- twice the strength for the price of one
- no additional connectors needed
- strength comparable to a welded connection
Any hole drilled is one hole too many
- all connections made without drilling or milling
- maximum wall thickness in key areas
- unlimited re-usability
- for required hole an integrated location groove guarantees precise and straight drilling
Stability increases with every turn
- every turn positions centering inserts tighter into the T-slot
- absolutely play-free, accurate and centrally aligned connection
- concave surface of extrusion guarantees durable vibration resistance
- low fastener height saves space in your design
Inserting the drop-in nut
- Simple and quick insertion of the drop-in nut into the 14 mm wide T-slot
- leaf spring assembly protects drop-in nut against unintended movement, guaranteed contact surface
- to position the the drop-in nut, just slide to stop position
Anything is possible - even post assembly
- simple post-assembly integration of struts without dismantling the frame
- easy repositioning of struts at any time
- no cutting of existing structures
- no surface treatment required
Save time, cut cost
- minimum assembly time required
- simple and quick selection of Extrusion and Fastening Technology
- no measuring of boreholes and no drawings necessary
- length of the extrusion is the only measurement needed
- labeled and tapped extrusions allow immediate assembly
Information
Request form
Send us your inquiries, we would be happy to provide more information!